For Solar Installers

Solar-ready roof data. Per plane. Per pitch.

Pitch, azimuth, and area for every roof plane — powered by the Google Solar API. Quote PV in minutes, not days.

$6.99 per report · No subscription · Results in under 5 minutes

Built for the way you work

Per-plane pitch & azimuth

Drop straight into your design software. Every facet labeled with the inputs PV design needs.

Same data Google uses

Built on the Google Solar API. The exact same imagery and modeling layer that powers Project Sunroof.

$6.99 per quote

Lower cost-per-lead than aerial imagery providers. Pay only when you actually quote.

Branded for your sales team

Hand the PDF to homeowners during the consult. Build trust with satellite-verified numbers.

What you get in every report

  • Pitch in degrees for every roof facet
  • Azimuth (0–360°) for production modeling
  • Area per plane in square feet
  • Total measurable PV area
  • Satellite imagery with overlay for proposal screenshots

Frequently asked questions

Does RoofSnap include pitch and azimuth for solar design?

Yes. Every plane is reported with pitch (degrees), azimuth (0–360°), and area in square feet — the inputs your design software needs for accurate PV layout and production modeling.

How is this different from Google Project Sunroof?

RoofSnap uses the same Google Solar API but delivers a contractor-ready PDF report with edge lengths, material breakdowns, and a measurement audit trail you can hand to a homeowner or AHJ.

Can I use these measurements for a permit submittal?

Many installers use the satellite report as a starting point and verify on-site before final permit drawings. The PDF includes a measurement audit log for transparency.

What about shading and obstruction?

Reports show satellite imagery with all detected roof planes and obstructions visible. Pair with your shading tool of choice for full production analysis.